Remove Physical Port IP Address(RMV PHYPORTIP)

Function

A configuration command that removes the IP address of a physical port.

Note

1. This command applies to only the GFGUA/GOGUA/GFGUB/GOGUB/GFGUG.

2. The number of a GE port on the GFGUA/GFGUB/GFGUG can only be 0 or 4; the number of a GE port on the GOGUA/GOGUB can only be 0 or 1.

3. The IP address of the physical port must have been configured.

4. If a physical port is used in a route, the port IP address cannot be removed.

Parameters

ID	Name	Description
SRN	Subrack No.	Meaning:Subrack No. Value range:0~11 Explanation: This parameter specifies the subrack number of an IP-based interface board. Default value:None
SN	Slot No.	Meaning:Slot No. Value range:0~27 Explanation: This parameter specifies the slot number of an IP-based interface board. Default value:None
PORT	Port No.	Meaning:Port No. Value range:0~7 Explanation: This parameter specifies the port number of an IP-based interface board. Default value:None
IPINDEX	IP address index	Meaning:IP address index Value range:0~5 Explanation: This parameter specifies the IP address index. A maximum of six IP addresses can be configured for one port. Default value:None

Example

Remove the IP address of a physical port (Subrack No. = 0; Slot No. = 14; Port No. = 0; IP address index = 0): 
RMV PHYPORTIP: SRN=0, SN=14, PORT=0, IPINDEX=0;