Remove NSVC(RMV NSVC)

Function

A configuration command that adds a virtual connection on the NS layer (NSVC).

Note

1. The NSVC to be removed must exist.

2. If you remove the last NSVC of an NSE, all cells under the NSE cannot provide data services.

Parameters

ID	Name	Description
NSVCI	NSVC Identifier	Meaning:NSVC Identifier Value range:0~65534 Explanation: This parameter specifies the NSVC Identifier (NSVCI). The NSVCI is unique in one NES. The number of NS-VCs configured on a BC depends on the number of timeslots occupied by the BC. Huawei recommends that the number of NS-VCs configured meet the following requirement: 10 kbit/s <= (number of timeslots occupied by BC x 64 kbit/s) / number of NS-VCs configured on BC NS-VC <= 100 kbit/s. Default value:None
NSEI	NSE Identifier	Meaning:NSE Identifier Value range:0~65534 Explanation: This parameter specifies the NSE index. Default value:None

Name

Description

NSVCI

NSVC Identifier

Meaning:NSVC Identifier

Value range:0~65534

Explanation: This parameter specifies the NSVC Identifier (NSVCI). The NSVCI is unique in one NES. The number of NS-VCs configured on a BC depends on the number of timeslots occupied by the BC. Huawei recommends that the number of NS-VCs configured meet the following requirement: 10 kbit/s <= (number of timeslots occupied by BC x 64 kbit/s) / number of NS-VCs configured on BC NS-VC <= 100 kbit/s.

Default value:None

NSEI

NSE Identifier

Meaning:NSE Identifier

Value range:0~65534

Explanation: This parameter specifies the NSE index.

Default value:None

Example

Remove the NSVC (NSVC Identifier = 1; NSE Identifier = 0):
RMV NSVC: NSVCI=1, NSEI=0;