Unblock Pb Interface CIC(UBL PBCIC)

Function

An OM command that unblocks a specified Pb-interface circuit.

Note

1. Blocking or unblocking a Pb-interface circuit may change the circuit status and affect the services on the Pb-interface.

2. If the PCU is built in the BSC, this command is not supported.

Parameters

ID	Name	Description
SRN	Subrack No.	Meaning: subrack number Value range: 0-11 Explanation: 1. This parameter specifies the number of a subrack. 2. A key field that identifies the unblocking for a Pb-interface CIC and indicates the subrack number of the Pb-interface CIC to be unblocked. Default value: None
PCU	PCU No.	Meaning: PCU number corresponding to the CIC Value range: 0-31 Explanation: A key field that identifies the unblocking for a Pb-interface CIC and indicates the PCU number corresponding to the Pb-interface CIC to be unblocked. Default value: None
OPMODE	Operation Mode	Meaning: operation mode Value range: BYCICRANGE(BY CIC RANGE), BYCICVALUE(BY CIC VALUE) Explanation: 1. operating by CIC range or operating by CIC value 2. A key field that identifies the unblocking for a Pb-interface CIC and indicates the searching mode for the Pb-interface CIC to be unblocked. Default value: None
STARTCIC	Start CIC	Meaning: start CIC Value range: 0-65535 Explanation: 1. The start CIC of the Pb-interface CIC range to be unblocked. 2. This parameter is mandatory if the searching is based on CIC range. Default value: None
ENDCIC	End CIC	Meaning: end CIC Value range: 0-65535 Explanation: 1. The end CIC of the Pb-interface CIC range to be unblocked. 2. This parameter is mandatory if the searching is based on CIC range. Default value: None
CIC	CIC	Meaning: CIC number of the board Value range: 0-65535 Explanation: 1. The number of the Pb-interface CIC to be unblocked. 2. This parameter is mandatory if the searching is based on a specified CIC number. 3. This parameter supports multiple values. Default value: None

Example

1. Unblock a Pb-interface circuit (Subrack No. = 0; PCU No. = 4; Operation Mode = BYCICVALUE(BY CIC VALUE); CIC = 4):
UBL PBCIC: SRN=0, PCU=4, OPMODE=BYCICVALUE, CIC=4;
2. Unblock a Pb-interface circuit (Subrack No. = 0; PCU No. = 4; Operation Mode = BYCICVALUE(BY CIC VALUE); CIC = 4&6):
UBL PBCIC: SRN=0, PCU=4, OPMODE=BYCICVALUE, CIC=4&6;
3. Unblock a Pb-interface circuit (Subrack No. = 0; PCU No. = 4; Operation Mode = BYCICRANGE(BY CIC RANGE); Start CIC = 2; End CIC = 15):
UBL PBCIC: SRN=0, PCU=4, OPMODE=BYCICRANGE, STARTCIC=2, ENDCIC=15;
Note:
If the specified CIC is not in the PCU, the MML client prompts a parameter error.