Upload BATCHFILE Result(ULD BATCHFILERST)

Function

An OM command that uploads output files of batch configuration commands from NEs to servers. During the uploading, a progress bar is displayed to indicate the upload progress.

Note

1. Ensure that the specified session ID exists.

2. Ensure that a batch configuration command session is activated before running the command.

3. Do not run this command during the activation of the batch configuration command session.

4. After a batch configuration command session is activated, only the Output file of this batch configuration command session activation can be uploaded. The Output file of the previous batch configuration command session activations cannot be uploaded.

Parameters

ID	Name	Description
SID	SessionID	Meaning: session ID Value range: 0-268435455 Explanation: Session ID identifies a session. Default value: None
FT	File type	Meaning: file type Value range: PREACTIVATE_RESULT, ACTIVATE_RESULT, ROLLBACK_RESULT, other Explanation: PREACTIVATE_RESULT indicates the pre-active file type; ACTIVATE_RESUL indicates the activated file type; TROLLBACK_RESULT indicates the rollback file type; OTHER indicates other file types. Default value: None
DSTF	Destination file name	Meaning: destination file name Value range: 1-100 characters Explanation: 1. This parameter specifies the name and path of the destination file on the FTP server. 2. The file name contains a maximum number of 31 characters (excluding the path). Default value: None
IP	FTPServer IP	Meaning: IP address of the FTP server Parameter format: 0.0.0.0-255.255.255.255 Explanation: the IP address of the FTP Server on the MML Client. Default value: None
USR	FTPServer user	Meaning: user name of the FTP server Maximum length: 1-16 characters Explanation: This parameter specifies the user name of the FTP server. Default value: None
PWD	User password	Meaning: user password Maximum length: 1-64 characters Explanation: This parameter specifies the user password of the FTP server. Default value: None

Example

Upload the output file of batch configuration command from the NE to the server (10.0.0.10): 
ULD BATCHFILE:SID=111111,USR="xxx",PWD="xxx",IP="xxx.xxx.xxx.xxx",
FT=ACTIVATE_RESULT,DSTF="batchfil_001_act.txt";