Winsteps problems and error codes

Top Up Down  A A

For Windows-related and other problems, see www.winsteps.com/problems.htm

 

Winsteps does not function under Windows-95 nor 3.1.

 

Error codes are reported by Winsteps for which no automatic action is possible.

 

Winsteps expects its input files to be in MS-DOS text file format, i.e., readable by a text editor such as NotePad.

If in doubt,

1. Open the Winsteps file in Microsoft Word (or equivalent)

2. "Save As": "Text with line breaks"

File may not have CR+LF line breaks

The file is not in standard "text" file format. This can be reported for files created on a Mac.

VARIABLE=VALUE EXPECTED :
{\rtf1\....

Your control file is in RTF, not TXT format.

NUMERIC VALUE EXPECTED:
ÿþT I T L E   =

Your control file is in Unicode, not ANSI coding.

NUMERIC VALUE EXPECTED:
þÿ T I T L E   =

Your control file is in Unicode Bigendian, not ANSI coding.

NUMERIC VALUE EXPECTED: TITLE =

Your control file is in UTF-8, not ANSI coding.

UNRECOGNIZED VARIABLE (CHECK SPELLING): Facets = 3

This can occur when a Facets control file is submitted to Winsteps.

Warning: IGNORED (too long):

The control-variable value is too long. The usable characters are actioned. The excess characters are ignored.

Oops!  Item labels = ..., but NI=...4

The count of item labels between &END and END LABELS does not match the number of items. The item labels on the Output Tables may be incorrect.

 

Typical error report on your Winsteps analysis window:

 

 

Windows Error Codes:

-2

Use File Menu to add a BLANK LINE at end of file

-1

End of file has been reached unexpectedly.

0

Error not detected. Processing has stopped itself.

1

Incorrect function. Contact winsteps.com

2

The system cannot find the file specified.

3

The system cannot find the path or directory specified. See www.winsteps.com/problems.htm

4

The system cannot open the file.

5

Access is denied. See www.winsteps.com/problems.htm

6

The handle is invalid.

7

The storage control blocks were destroyed.

8

Not enough storage is available to process this command.

9

The storage control block address is invalid.

10

The environment is incorrect.

11

An attempt was made to load a program with an incorrect format.

12

The access code is invalid.

13

The data is invalid.

14

Not enough storage is available to complete this operation.

15

The system cannot find the drive specified.

16

The directory cannot be removed.

17

The system cannot move the file to a different disk drive.

18

There are no more files.

19

The media is write protected.

20

The system cannot find the specified device.

21

The device is not ready.

22

The device does not recognize the command.

23

Data error (cyclic redundancy check).

24

The program issued a command but the command length is incorrect.

25

The drive cannot locate a specific area or track on the disk.

26

The specified disk or diskette cannot be accessed.

27

The drive cannot find the sector requested.

28

The printer is out of paper.

29

The system cannot write to the specified device.

30

The system cannot read from the specified device.

31

A device attached to the system is not functioning.

32

The process cannot access the file because it is being used by another process.

33

The process cannot access the file because another process has locked a portion of the file.

34

The wrong diskette is in the drive.

36

Too many files opened for sharing.

38

Reached the end of the file.

39

The disk is full.

50

The network request is not supported.

51

The remote computer is not available.

52

A duplicate name exists on the network.

53

The network path was not found.

54

The network is busy.

55

The specified network resource or device is no longer available.

56

The network BIOS command limit has been reached.

57

A network adapter hardware error occurred.

58

The specified server cannot perform the requested operation.

59

An unexpected network error occurred.

60

The remote adapter is not compatible.

61

The printer queue is full.

62

Space to store the file waiting to be printed is not available on the server.

63

Your file waiting to be printed was deleted.

64

The specified network name is no longer available.

65

Network access is denied.

66

The network resource type is not correct.

67

The network name cannot be found.

68

The name limit for the local computer network adapter card was exceeded.

69

The network BIOS session limit was exceeded.

70

The remote server has been paused or is in the process of being started.

71

Remote computer can accept no more connections.

72

The specified printer or disk device has been paused.

80

The file exists.

82

The directory or file cannot be created.

83

Fail on interrupt 24 handler.

84

Storage to process this request is not available.

85

The local device name is already in use.

86

The specified network password is not correct.

87

The parameter is incorrect.

88

A write fault occurred on the network.

89

The system cannot start another process at this time.

100

Cannot create another system semaphore.

101

The exclusive semaphore is owned by another process.

102

The semaphore is set and cannot be closed.

103

The semaphore cannot be set again.

104

Cannot request exclusive semaphores at interrupt time.

105

The previous ownership of this semaphore has ended.

106

Insert the diskette for drive %1.

107

The program stopped because an alternate diskette was not inserted.

108

The disk is in use or locked by another process.

109

The pipe has been ended.

110

The system cannot open the device or file specified.

111

The file name is too long.

112

There is not enough space on the disk.

113

No more internal file identifiers available.

114

The target internal file identifier is incorrect.

117

The IOCTL call made by the application program is not correct.

118

The verify-on-write switch parameter value is not correct.

119

The system does not support the command requested.

120

This function is not valid on this platform.

121

The semaphore time-out period has expired.

122

The data area passed to a system call is too small.

123

The file name, directory name, or volume label syntax is incorrect.

124

The system call level is not correct.

125

The disk has no volume label.

126

The specified module could not be found.

127

The specified procedure could not be found.

128

There are no child processes to wait for.

129

The %1 application cannot be run in Windows NT mode.

130

Attempt to use a file handle to an open disk partition for an operation other than raw disk I/O.

131

An attempt was made to move the file pointer before the beginning of the file. Can also happen when trying to write a file bigger than file-system limits.

132

The file pointer cannot be set on the specified device or file.

133

A JOIN or SUBST command cannot be used for a drive that contains previously joined drives.

134

An attempt was made to use a JOIN or SUBST command on a drive that has already been joined.

135

An attempt was made to use a JOIN or SUBST command on a drive that has already been substituted.

136

The system tried to delete the JOIN of a drive that is not joined.

137

The system tried to delete the substitution of a drive that is not substituted.

138

The system tried to join a drive to a directory on a joined drive.

139

The system tried to substitute a drive to a directory on a substituted drive.

140

The system tried to join a drive to a directory on a substituted drive.

141

The system tried to SUBST a drive to a directory on a joined drive.

142

The system cannot perform a JOIN or SUBST at this time.

143

The system cannot join or substitute a drive to or for a directory on the same drive.

144

The directory is not a subdirectory of the root directory.

145

The directory is not empty.

146

The path specified is being used in a substitute.

147

Not enough resources are available to process this command.

148

The path specified cannot be used at this time.

149

An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous substitute.

150

System trace information was not specified in your Config.sys file, or tracing is disallowed.

151

The number of specified semaphore events for DosMuxSemWait is not correct.

152

DosMuxSemWait did not execute; too many semaphores are already set.

153

The DosMuxSemWait list is not correct.

154

The volume label you entered exceeds the label character limit of the target file system.

155

Cannot create another thread.

156

The recipient process has refused the signal.

157

The segment is already discarded and cannot be locked.

158

The segment is already unlocked.

159

The address for the thread identifier is not correct.

160

The argument string passed to DosExecPgm is not correct.

161

The specified path is invalid.

162

A signal is already pending.

164

No more threads can be created in the system.

167

Unable to lock a region of a file.

170

The requested resource is in use.

173

A lock request was not outstanding for the supplied cancel region.

174

The file system does not support atomic changes to the lock type.

180

The system detected a segment number that was not correct.

182

The operating system cannot run %1.

183

Cannot create a file when that file already exists.

186

The flag passed is not correct.

187

The specified system semaphore name was not found.

188

The operating system cannot run %1.

189

The operating system cannot run %1.

190

The operating system cannot run %1.

191

Cannot run %1 in Windows NT mode.

192

The operating system cannot run %1.

193

Is not a valid application.

194

The operating system cannot run %1.

195

The operating system cannot run %1.

196

The operating system cannot run this application program.

197

The operating system is not presently configured to run this application.

198

The operating system cannot run %1.

199

The operating system cannot run this application program.

200

The code segment cannot be greater than or equal to 64 KB.

201

The operating system cannot run %1.

202

The operating system cannot run %1.

203

The system could not find the environment option that was entered.

205

No process in the command subtree has a signal handler.

206

The file name or extension is too long.

207

The ring 2 stack is in use.

208

The global file name characters, "*" or "?," are entered incorrectly or too many global file name characters are specified.

209

The signal being posted is not correct.

210

The signal handler cannot be set.

212

The segment is locked and cannot be reallocated.

214

Too many dynamic-link modules are attached to this program or dynamic-link module.

215

Cannot nest calls to the LoadModule function.

216

The image file %1 is valid, but is for a machine type other than the current machine.

230

The pipe state is invalid.

231

All pipe instances are busy.

232

The pipe is being closed.

233

No process is on the other end of the pipe.

234

More data is available.

240

The session was canceled.

254

The specified extended attribute name was invalid.

255

The extended attributes are inconsistent.

259

No more data is available.

266

The copy functions cannot be used.

267

The directory name is invalid.

275

The extended attributes did not fit in the buffer.

276

The extended attribute file on the mounted file system is corrupt.

277

The extended attribute table file is full.

278

The specified extended attribute handle is invalid.

282

The mounted file system does not support extended attributes.

288

Attempt to release mutex not owned by caller.

298

Too many posts were made to a semaphore.

299

Only part of a ReadProcessMemory or WriteProcessMemory request was completed.

317

The system cannot find message text for message number 0x%1 in the message file for %2.

487

Attempt to access invalid address.

534

Arithmetic result exceeded 32 bits.

535

There is a process on other end of the pipe.

536

Waiting for a process to open the other end of the pipe.

994

Access to the extended attribute was denied.

995

The I/O operation has been aborted because of either a thread exit or an application request.

996

Overlapped I/O event is not in a signaled state.

997

Overlapped I/O operation is in progress.

998

Invalid access to memory location.

999

Error performing inpage operation.

1001

Recursion too deep; the stack overflowed.

1002

The window cannot act on the sent message.

1003

Cannot complete this function.

1004

Invalid flags.

1005

The volume does not contain a recognized file system.

1006

The volume for a file has been externally altered so that the opened file is no longer valid.

1007

The requested operation cannot be performed in full-screen mode.

1008

An attempt was made to reference a token that does not exist.

1009

The configuration registry database is corrupt.

1010

The configuration registry key is invalid.

1011

The configuration registry key could not be opened.

1012

The configuration registry key could not be read.

1013

The configuration registry key could not be written.

1014

One of the files in the registry database had to be recovered by use of a log or alternate copy. The recovery was successful.

1015

The registry is corrupted.

1016

An I/O operation initiated by the registry failed unrecoverably.

1017

The system has attempted to load or restore a file into the registry, but the specified file is not in a registry file format.

1018

Illegal operation attempted on a registry key that has been marked for deletion.

1019

System could not allocate the required space in a registry log.

1020

Cannot create a symbolic link in a registry key that already has subkeys or values.

1021

Cannot create a stable subkey under a volatile parent key.

1022

A notify change request is being completed and the information is not being returned in the caller's buffer.

1051

A stop control has been sent to a service that other running services are dependent on.

1052

The requested control is not valid for this service.

1053

The service did not respond to the start or control request in a timely fashion.

1054

A thread could not be created for the service.

1055

The service database is locked.

1056

An instance of the service is already running.

1057

The account name is invalid or does not exist.

1058

The specified service is disabled and cannot be started.

1059

Circular service dependency was specified.

1060

The specified service does not exist as an installed service.

1061

The service cannot accept control messages at this time.

1062

The service has not been started.

1063

The service process could not connect to the service controller.

1064

An exception occurred in the service when handling the control request.

1065

The database specified does not exist.

1066

The service has returned a service-specific error code.

1067

The process terminated unexpectedly.

1068

The dependency service or group failed to start.

1069

The service did not start due to a logon failure.

1070

After starting, the service hung in a start-pending state.

1071

The specified service database lock is invalid.

1072

The specified service has been marked for deletion.

1073

The specified service already exists.

1074

The system is currently running with the last-known-good configuration.

1075

The dependency service does not exist or has been marked for deletion.

1076

The current boot has already been accepted for use as the last-known-good control set.

1077

No attempts to start the service have been made since the last boot.

1078

The name is already in use as either a service name or a service display name.

1079

The account specified for this service is different from the account specified for other services running in the same process.

1100

The physical end of the tape has been reached.

1101

A tape access reached a filemark.

1102

The beginning of the tape or partition was encountered.

1103

A tape access reached the end of a set of files.

1104

No more data is on the tape.

1105

Tape could not be partitioned.

1106

When accessing a new tape of a multivolume partition, the current block size is incorrect.

1107

Tape partition information could not be found when loading a tape.

1108

Unable to lock the media eject mechanism.

1109

Unable to unload the media.

1110

The media in the drive may have changed.

1111

The I/O bus was reset.

1112

No media in drive.

1113

No mapping for the Unicode character exists in the target multibyte code page.

1114

A dynamic link library (DLL) initialization routine failed.

1115

A system shutdown is in progress.

1116

Unable to abort the system shutdown because no shutdown was in progress.

1117

The request could not be performed because of an I/O device error.

1118

No serial device was successfully initialized. The serial driver will unload.

1119

Unable to open a device that was sharing an interrupt request (IRQ) with other devices.

1120

A serial I/O operation was completed by another write to the serial port.

1121

A serial I/O operation completed because the time-out period expired.

1122

No identifier address mark was found on the floppy disk.

1123

Mismatch between the floppy disk sector identifier field and the floppy disk controller track address.

1124

The floppy disk controller reported an error that is not recognized by the floppy disk driver.

1125

The floppy disk controller returned inconsistent results in its registers.

1126

While accessing the hard disk, a recalibrate operation failed, even after retries.

1127

While accessing the hard disk, a disk operation failed even after retries.

1128

While accessing the hard disk, a disk controller reset was needed, but even that failed.

1129

Physical end of tape encountered.

1130

Not enough server storage is available to process this command.

1131

A potential deadlock condition has been detected.

1132

The base address or the file offset specified does not have the proper alignment.

1140

An attempt to change the system power state was vetoed by another application or driver.

1141

The basic input/output system (BIOS) failed an attempt to change the system power state.

1142

An attempt was made to create more links on a file than the file system supports.

1150

The specified program requires a newer version of Windows.

1151

The specified program is not a Windows or MS-DOS program.

1152

Cannot start more than one instance of the specified program.

1153

The specified program was written for an earlier version of Windows.

1154

One of the library files needed to run this application is damaged.

1155

No application is associated with the specified file for this operation.

1156

An error occurred in sending the command to the application.

1157

One of the library files needed to run this application cannot be found.

1200

The specified device name is invalid.

1201

The device is not currently connected but it is a remembered connection.

1202

An attempt was made to remember a device that had previously been remembered.

1203

No network provider accepted the given network path.

1204

The specified network provider name is invalid.

1205

Unable to open the network connection profile.

1206

The network connection profile is corrupt.

1207

Cannot enumerate a noncontainer.

1208

An extended error has occurred.

1209

The format of the specified group name is invalid.

1210

The format of the specified computer name is invalid.

1211

The format of the specified event name is invalid.

1212

The format of the specified domain name is invalid.

1213

The format of the specified service name is invalid.

1214

The format of the specified network name is invalid.

1215

The format of the specified share name is invalid.

1216

The format of the specified password is invalid.

1217

The format of the specified message name is invalid.

1218

The format of the specified message destination is invalid.

1219

The credentials supplied conflict with an existing set of credentials.

1220

An attempt was made to establish a session to a network server, but there are already too many sessions established to that server.

1221

The workgroup or domain name is already in use by another computer on the network.

1222

The network is not present or not started.

1223

The operation was canceled by the user.

1224

The requested operation cannot be performed on a file with a user-mapped section open.

1225

The remote system refused the network connection.

1226

The network connection was gracefully closed.

1227

The network transport endpoint already has an address associated with it.

1228

An address has not yet been associated with the network endpoint.

1229

An operation was attempted on a nonexistent network connection.

1230

An invalid operation was attempted on an active network connection.

1231

The remote network is not reachable by the transport.

1232

The remote system is not reachable by the transport.

1233

The remote system does not support the transport protocol.

1234

No service is operating at the destination network endpoint on the remote system.

1235

The request was aborted.

1236

The network connection was aborted by the local system.

1237

The operation could not be completed. A retry should be performed.

1238

A connection to the server could not be made because the limit on the number of concurrent connections for this account has been reached.

1239

Attempting to log in during an unauthorized time of day for this account.

1240

The account is not authorized to log in from this station.

1241

The network address could not be used for the operation requested.

1242

The service is already registered.

1243

The specified service does not exist.

1244

The operation being requested was not performed because the user has not been authenticated.

1245

The operation being requested was not performed because the user has not logged on to the network. The specified service does not exist.

1246

Caller to continue with work in progress.

1247

An attempt was made to perform an initialization operation when initialization has already been completed.

1248

No more local devices.

1300

Not all privileges referenced are assigned to the caller.

1301

Some mapping between account names and security IDs was not done.

1302

No system quota limits are specifically set for this account.

1303

No encryption key is available. A well-known encryption key was returned.

1304

The password is too complex to be converted to a LAN Manager password. The LAN Manager password returned is a null string.

1305

The revision level is unknown.

1306

Indicates two revision levels are incompatible.

1307

This security identifier may not be assigned as the owner of this object.

1308

This security identifier may not be assigned as the primary group of an object.

1309

An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client.

1310

The group cannot be disabled.

1311

There are currently no logon servers available to service the logon request.

1312

A specified logon session does not exist. It may already have been terminated.

1313

A specified privilege does not exist.

1314

A required privilege is not held by the client.

1315

The name provided is not a properly formed account name.

1316

The specified user already exists.

1317

The specified user does not exist.

1318

The specified group already exists.

1319

The specified group does not exist.

1320

Either the specified user account is already a member of the specified group, or the specified group cannot be deleted because it contains a member.

1321

The specified user account is not a member of the specified group account.

1322

The last remaining administration account cannot be disabled or deleted.

1323

Unable to update the password. The value provided as the current password is incorrect.

1324

Unable to update the password. The value provided for the new password contains values that are not allowed in passwords.

1325

Unable to update the password because a password update rule has been violated.

1326

Logon failure-unknown user name or bad password.

1327

Logon failure-user account restriction.

1328

Logon failure-account logon time restriction violation.

1329

Logon failure-user not allowed to log on to this computer.

1330

Logon failure-the specified account password has expired.

1331

Logon failure-account currently disabled.

1332

No mapping between account names and security IDs was done.

1333

Too many LUIDs were requested at one time.

1334

No more LUIDs are available.

1335

The subauthority part of a security identifier is invalid for this particular use.

1336

The access control list (ACL) structure is invalid.

1337

The security identifier structure is invalid.

1338

The security descriptor structure is invalid.

1340

The inherited access control list (ACL) or access control entry (ACE) could not be built.

1341

The server is currently disabled.

1342

The server is currently enabled.

1343

The value provided was an invalid value for an identifier authority.

1344

No more memory is available for security information updates.

1345

The specified attributes are invalid, or incompatible with the attributes for the group as a whole.

1346

Either a required impersonation level was not provided, or the provided impersonation level is invalid.

1347

Cannot open an anonymous level security token.

1348

The validation information class requested was invalid.

1349

The type of the token is inappropriate for its attempted use.

1350

Unable to perform a security operation on an object that has no associated security.

1351

Indicates that a Windows NT Server could not be contacted or that objects within the domain are protected such that necessary information could not be retrieved.

1352

The security account manager (SAM) or local security authority (LSA) server was in the wrong state to perform the security operation.

1353

The domain was in the wrong state to perform the security operation.

1354

This operation is only allowed for the Primary Domain Controller (PDC) of the domain.

1355

The specified domain did not exist.

1356

The specified domain already exists.

1357

An attempt was made to exceed the limit on the number of domains per server.

1358

Unable to complete the requested operation because of either a catastrophic media failure or a data structure corruption on the disk.

1359

The security account database contains an internal inconsistency.

1360

Generic access types were contained in an access mask that should already be mapped to nongeneric types.

1361

A security descriptor is not in the right format (absolute or self-relative).

1362

The requested action is restricted for use by logon processes only. The calling process has not registered as a logon process.

1363

Cannot start a new logon session with an identifier that is already in use.

1364

A specified authentication package is unknown.

1365

The logon session is not in a state that is consistent with the requested operation.

1366

The logon session identifier is already in use.

1367

A logon request contained an invalid logon type value.

1368

Unable to impersonate using a named pipe until data has been read from that pipe.

1369

The transaction state of a registry subtree is incompatible with the requested operation.

1370

An internal security database corruption has been encountered.

1371

Cannot perform this operation on built-in accounts.

1372

Cannot perform this operation on this built-in special group.

1373

Cannot perform this operation on this built-in special user.

1374

The user cannot be removed from a group because the group is currently the user's primary group.

1375

The token is already in use as a primary token.

1376

The specified local group does not exist.

1377

The specified account name is not a member of the local group.

1378

The specified account name is already a member of the local group.

1379

The specified local group already exists.

1380

Logon failure-the user has not been granted the requested logon type at this computer.

1381

The maximum number of secrets that may be stored in a single system has been exceeded.

1382

The length of a secret exceeds the maximum length allowed.

1383

The local security authority database contains an internal inconsistency.

1384

During a logon attempt, the user's security context accumulated too many security IDs.

1385

Logon failure-the user has not been granted the requested logon type at this computer.

1386

A cross-encrypted password is necessary to change a user password.

1387

A new member could not be added to a local group because the member does not exist.

1388

A new member could not be added to a local group because the member has the wrong account type.

1389

Too many security IDs have been specified.

1390

A cross-encrypted password is necessary to change this user password.

1391

Indicates an ACL contains no inheritable components.

1392

The file or directory is corrupted and non-readable.

1393

The disk structure is corrupted and non-readable.

1394

There is no user session key for the specified logon session.

1395

The service being accessed is licensed for a particular number of connections. No more connections can be made to the service at this time because there are already as many connections as the service can accept.

1400

Invalid window handle.

1401

Invalid menu handle.

1402

Invalid cursor handle.

1403

Invalid accelerator table handle.

1404

Invalid hook handle.

1405

Invalid handle to a multiple-window position structure.

1406

Cannot create a top-level child window.

1407

Cannot find window class.

1408

Invalid window, it belongs to another thread.

1409

Hot key is already registered.

1410

Class already exists.

1411

Class does not exist.

1412

Class still has open windows.

1413

Invalid index.

1414

Invalid icon handle.

1415

Using private DIALOG window words.

1416

The list box identifier was not found.

1417

No wildcards were found.

1418

Thread does not have a clipboard open.

1419

Hot key is not registered.

1420

The window is not a valid dialog window.

1421

Control identifier not found.

1422

Invalid message for a combo box because it does not have an edit control.

1423

The window is not a combo box.

1424

Height must be less than 256.

1425

Invalid device context (DC) handle.

1426

Invalid hook procedure type.

1427

Invalid hook procedure.

1428

Cannot set nonlocal hook without a module handle.

1429

This hook procedure can only be set globally.

1430

The journal hook procedure is already installed.

1431

The hook procedure is not installed.

1432

Invalid message for single-selection list box.

1434

This list box does not support tab stops.

1435

Cannot destroy object created by another thread.

1436

Child windows cannot have menus.

1437

The window does not have a system menu.

1438

Invalid message box style.

1439

Invalid system-wide (SPI_*) parameter.

1440

Screen already locked.

1441

All handles to windows in a multiple-window position structure must have the same parent.

1442

The window is not a child window.

1443

Invalid GW_* command.

1444

Invalid thread identifier.

1445

Cannot process a message from a window that is not a multiple-document interface (MDI) window.

1446

Pop-up menu already active.

1447

The window does not have scroll bars.

1448

Scroll bar range cannot be greater than 0x7FFF.

1449

Cannot show or remove the window in the way specified.

1450

Insufficient system resources exist to complete the requested service.

1451

Insufficient system resources exist to complete the requested service.

1452

Insufficient system resources exist to complete the requested service.

1453

Insufficient quota to complete the requested service.

1454

Insufficient quota to complete the requested service.

1455

The paging file is too small for this operation to complete.

1456

A menu item was not found.

1457

Invalid keyboard layout handle.

1458

Hook type not allowed.

1459

This operation requires an interactive window station.

1460

This operation returned because the time-out period expired.

1500

The event log file is corrupted.

1501

No event log file could be opened, so the event logging service did not start.

1502

The event log file is full.

1503

The event log file has changed between read operations.

1700

The string binding is invalid.

1701

The binding handle is not the correct type.

1702

The binding handle is invalid.

1703

The RPC protocol sequence is not supported.

1704

The RPC protocol sequence is invalid.

1705

The string universal unique identifier (UUID) is invalid.

1706

The endpoint format is invalid.

1707

The network address is invalid.

1708

No endpoint was found.

1709

The time-out value is invalid.

1710

The object universal unique identifier (UUID) was not found.

1711

The object universally unique identifier (UUID) has already been registered.

1712

The type UUID has already been registered.

1713

The remote procedure call (RPC) server is already listening.

1714

No protocol sequences have been registered.

1715

The RPC server is not listening.

1716

The manager type is unknown.

1717

The interface is unknown.

1718

There are no bindings.

1719

There are no protocol sequences.

1720

The endpoint cannot be created.

1721

Not enough resources are available to complete this operation.

1722

The RPC server is unavailable.

1723

The RPC server is too busy to complete this operation.

1724

The network options are invalid.

1725

There is not a remote procedure call active in this thread.

1726

The remote procedure call failed.

1727

The remote procedure call failed and did not execute.

1728

A remote procedure call (RPC) protocol error occurred.

1730

The transfer syntax is not supported by the RPC server.

1732

The universal unique identifier (UUID) type is not supported.

1733

The tag is invalid.

1734

The array bounds are invalid.

1735

The binding does not contain an entry name.

1736

The name syntax is invalid.

1737

The name syntax is not supported.

1739

No network address is available to use to construct a universal unique identifier (UUID).

1740

The endpoint is a duplicate.

1741

The authentication type is unknown.

1742

The maximum number of calls is too small.

1743

The string is too long.

1744

The RPC protocol sequence was not found.

1745

The procedure number is out of range.

1746

The binding does not contain any authentication information.

1747

The authentication service is unknown.

1748

The authentication level is unknown.

1749

The security context is invalid.

1750

The authorization service is unknown.

1751

The entry is invalid.

1752

The server endpoint cannot perform the operation.

1753

There are no more endpoints available from the endpoint mapper.

1754

No interfaces have been exported.

1755

The entry name is incomplete.

1756

The version option is invalid.

1757

There are no more members.

1758

There is nothing to unexport.

1759

The interface was not found.

1760

The entry already exists.

1761

The entry is not found.

1762

The name service is unavailable.

1763

The network address family is invalid.

1764

The requested operation is not supported.

1765

No security context is available to allow impersonation.

1766

An internal error occurred in a remote procedure call (RPC).

1767

The RPC server attempted an integer division by zero.

1768

An addressing error occurred in the RPC server.

1769

A floating-point operation at the RPC server caused a division by zero.

1770

A floating-point underflow occurred at the RPC server.

1771

A floating-point overflow occurred at the RPC server.

1772

The list of RPC servers available for the binding of auto handles has been exhausted.

1773

Unable to open the character translation table file.

1774

The file containing the character translation table has fewer than 512 bytes.

1775

A null context handle was passed from the client to the host during a remote procedure call.

1777

The context handle changed during a remote procedure call.

1778

The binding handles passed to a remote procedure call do not match.

1779

The stub is unable to get the remote procedure call handle.

1780

A null reference pointer was passed to the stub.

1781

The enumeration value is out of range.

1782

The byte count is too small.

1783

The stub received bad data.

1784

The supplied user buffer is not valid for the requested operation.

1785

The disk media is not recognized. It may not be formatted.

1786

The workstation does not have a trust secret.

1787

The SAM database on the Windows NT Server does not have a computer account for this workstation trust relationship.

1788

The trust relationship between the primary domain and the trusted domain failed.

1789

The trust relationship between this workstation and the primary domain failed.

1790

The network logon failed.

1791

A remote procedure call is already in progress for this thread.

1792

An attempt was made to logon, but the network logon service was not started.

1793

The user's account has expired.

1794

The redirector is in use and cannot be unloaded.

1795

The specified printer driver is already installed.

1796

The specified port is unknown.

1797

The printer driver is unknown.

1798

The print processor is unknown.

1799

The specified separator file is invalid.

1800

The specified priority is invalid.

1801

The printer name is invalid.

1802

The printer already exists.

1803

The printer command is invalid.

1804

The specified data type is invalid.

1805

The environment specified is invalid.

1806

There are no more bindings.

1807

The account used is an interdomain trust account. Use your global user account or local user account to access this server.

1808

The account used is a computer account. Use your global user account or local user account to access this server.

1809

The account used is a server trust account. Use your global user account or local user account to access this server.

1810

The name or security identifier (SID) of the domain specified is inconsistent with the trust information for that domain.

1811

The server is in use and cannot be unloaded.

1812

The specified image file did not contain a resource section.

1813

The specified resource type cannot be found in the image file.

1814

The specified resource name cannot be found in the image file.

1815

The specified resource language identifier cannot be found in the image file.

1816

Not enough quota is available to process this command.

1817

No interfaces have been registered.

1818

The server was altered while processing this call.

1819

The binding handle does not contain all required information.

1820

Communications failure.

1821

The requested authentication level is not supported.

1822

No principal name registered.

1823

The error specified is not a valid Windows NT RPC error value.

1824

A UUID that is valid only on this computer has been allocated.

1825

A security package specific error occurred.

1826

Thread is not canceled.

1827

Invalid operation on the encoding/decoding handle.

1828

Incompatible version of the serializing package.

1829

Incompatible version of the RPC stub.

1830

The idl pipe object is invalid or corrupted.

1831

The operation is invalid for a given idl pipe object.

1832

The Interface Definition Language (IDL) pipe version is not supported.

1898

The group member was not found.

1899

The endpoint mapper database could not be created.

1900

The object UUID is the nil UUID.

1901

The specified time is invalid.

1902

The specified form name is invalid.

1903

The specified form size is invalid.

1904

The specified printer handle is already being waited on

1905

The specified printer has been deleted.

1906

The state of the printer is invalid.

1907

The user must change his password before he logs on the first time.

1908

Could not find the domain controller for this domain.

1909

The referenced account is currently locked out and may not be logged on to.

1910

The object exporter specified was not found.

1911

The object specified was not found.

1912

The object resolver set specified was not found.

1913

Some data remains to be sent in the request buffer.

2000

The pixel format is invalid.

2001

The specified driver is invalid.

2002

The window style or class attribute is invalid for this operation.

2003

The requested metafile operation is not supported.

2004

The requested transformation operation is not supported.

2005

The requested clipping operation is not supported.

2202

The specified user name is invalid.

2250

This network connection does not exist.

2401

This network connection has files open or requests pending.

2402

Active connections still exist.

2404

The device is in use by an active process and cannot be disconnected.

3000

The specified print monitor is unknown.

3001

The specified printer driver is currently in use.

3002

The spool file was not found.

3003

A StartDocPrinter call was not issued.

3004

An AddJob call was not issued.

3005

The specified print processor has already been installed.

3006

The specified print monitor has already been installed.

3007

The specified print monitor does not have the required functions.

3008

The specified print monitor is currently in use.

3009

The requested operation is not allowed when there are jobs queued to the printer.

3010

The requested operation is successful. Changes will not be effective until the system is rebooted.

3011

The requested operation is successful. Changes will not be effective until the service is restarted.

4000

WINS encountered an error while processing the command.

4001

The local WINS can not be deleted.

4002

The importation from the file failed.

4003

The backup failed. Was a full backup done before?

4004

The backup failed. Check the directory to which you are backing the database.

4005

The name does not exist in the WINS database.

4006

Replication with a nonconfigured partner is not allowed.

6099

Your analysis has exceeded computational abilities.

6100

You are trying to set an integer control variable outside the range 32,675 to -32,676.

6101

An integer is expected, but something else has been found. Are there person, item or category numbers in your deletion and anchor files?

6103

A number is expected, but something else has been found. Are your anchor values specified correctly?

6104

Your analysis has exceeded computational abilities.

6118

The list of servers for this workgroup is not currently available.

6209

You assigned two files with the same name.

6311

You are trying to process more than 32,676 elements.

6405

End of file has been reached unexpectedly.

6405

See -1 above.

6413

You have specified two different files with the same name, e.g. your output file and your IFILE= must have different names.

6414

You tried to access a protected file or a directory index.

6416

An input file cannot be found, or an output file cannot be written.

6417

DOS needs a larger file area. Increase the number in your FILES= statement in your CONFIG.SYS file.

6421

You tried to write to a read-only or locked file. In WINDOWS, does another program still have your file open?

6422

You've run out of disk space

6501

End of file has been reached unexpectedly.

6700

Your analysis requires more RAM memory



FORTRAN Error Codes:

10000

File not open for read.

10001

File not open for write.

10002

File not found.

10003

Record length negative or 0.

10004

Buffer allocation failed.

10005

Bad iolist specifier.

10006

Error in format string.

10007

Illegal repeat count.

10008

Hollerith count exceeds remaining format string.

10009

Format string missing opening "(".

10010

Format string has unmatched parentheses.

10011

Format string has unmatched quotes.

10012

Non-repeatable format descriptor.

10013

Attempt to read past end of file.

10014

Bad file specification.

10015

Format group table overflow.

10016

Illegal character in numeric input.

10017

No record specified for direct access.

10018

Maximum record number exceeded.

10019

Illegal file type for namelist directed I/O.

10020

Illegal input for namelist directed I/O.

10021

Variable not present in current namelist.

10022

Variable type or size does not match edit descriptor.

10023

Illegal direct access record number.

10024

Illegal use of internal file.

10025

RECL= only valid for direct access files.

10026

BLOCK= only valid for unformatted sequential files.

10027

Unable to truncate file after rewind, backspace, or endfile.

10028

Can't do formatted 1/0 on an entire structure.

10029

Illegal (negative) unit specified.

10030

Specifications in re-open do not match previous open.

10031

No implicit OPEN for direct access files.

10032

Cannot open an existing file with STATUS='NEW'.

10033

Command not allowed for unit type.

10034

MRWE is required for that feature.

10035

Bad specification for window.

10036

Endian specifier not BIG_ENDIAN or LITTLE_ENDIAN.

10037

Cannot ENDIAN convert entire structures.

10038

Attempt to read past end of record.

10039

Attempt to read past end of record in non-advancing I/O.

10040

Illegal specifier for ADVANCE=.

10041

Illegal specifier for DELIM=.

10042

Illegal specifier for PAD=.

10043

SIZE= specified with ADVANCE=YES.

10044

EOR= specified with ADVANCE=YES.

10045

Cannot DEALLOCATE disassociated pointer or unallocated array.

10046

Cannot DEALLOCATE a portion of an original allocation.

10047

An allocatable array has already been allocated.

10048

Internal or unknown runtime library error.

10049

Unknown data type passed to runtime library.

10050

Illegal DIM argument to array intrinsic.

10051

Size of SOURCE argument to RESHAPE smaller than SHAPE array.

10052

SHAPE array for RESHAPE contains a negative value.

10053

Unallocated or disassociated array passed to inquiry function.

10054

The ncopies argument to REPEAT is negative.

10055

The S argument to NEAREST is negative.

10056

The ORDER argument to RESHARE contains an illegal value.

10057

Result of TRANSFER with no SIZE is smaller than source.

10058

SHAPE array for RESHAPE is zero sized array.

10059

VECTOR argument to UNPACK contains insufficient values.

10060

Attempt to write a record longer than specified record length.

10061

ADVANCE= specified for direct access or unformatted file.

10062

NAMELIST name is longer than specified record length.

10063

NAMELIST variable name exceeds maximum length.

10064

PAD= specified for unformatted file.

10065

NAMELIST input contains multiple strided arrays.

10066

Expected & or $ as first character for NAMELIST input.

10067

NAMELIST group does not match current input group.

10068

Pointer or allocatable array not associated or allocated.

10069

NAMELIST input contains negative array stride.

10070

Runtime memory allocation fails.



FORMAT= Error Codes:

6205

A edit descriptor problem, e.g. ZA instead of 2A or l for 1, or O for 0

6502

Repeat field not a positive integer, e.g. 7.3A1 instead of 7A1

6503

Multiple repeat field, e.g. 2*3 instead of 6

6504

Invalid number, e.g. 7D mistyped for 70

6980

Integer expected, e.g. T2Z mistyped for T22

6981

Initial left parenthesis expected. FORMAT= must start with (

6982

Positive integer required, e.g. 0X is not allowed.

6983

Invalid repeat count, e.g 3T22 is not allowed, only T22

6984

An integer must precede X, e.g. X is not allowed, use 1X

6985

B must be followed by N or Z

6986

Parentheses () can go no more than 16 levels deep.

6987

F,D,E,G fields must contain a . e.g. F6 instead of F6.0

6988

Not enough ) in format.

6989

Unknown or missing character in format, e.g. two commas together: ,,

6990

Too many leading zeroes specified in I format, e.g. I6.7 instead of I6.6

6991

Numerical value greater than 32766 in FORMAT= statement.