Create Annotative Leaders and Multileaders

Create Annotative Objects

Create Annotative Hatches

 

Annotate Drawings > Work with Annotations > Scale Annotations > Create Annotative Objects > 

Create Annotative Blocks and Attributes

Expand All Expand all collapsed sections. Collapse All Collapse all expanded sections.

Concept

Procedure

Quick Reference

If you want to use geometric objects to annotate your drawing, combine the objects into an annotative block definition.

Annotative block definitions create annotative block references. Annotative block references and attributes initially support the current annotation scale at the time they are inserted. You should insert annotative block references with a unit factor of 1.

You cannot change the Annotative property of individual block references.

To set an annotative block’s paper size, you should define the block in paper space or on the Model tab with the annotation scale set to 1:1.

When creating and working with annotative blocks and annotative objects within blocks, the following points should be noted:

• Nonannotative blocks can contain annotative objects, which are scaled by the block’s scale factor in addition to the annotation scale.
• Annotative blocks cannot reside in annotative blocks.
• Annotative block references are scaled uniformly by the current annotation scale as well as any user scale applied to the block reference.
• Blocks that contain annotative objects should not be manually scaled.

You can define annotative attributes for annotative and nonannotative blocks. Use annotative attributes with nonannotative blocks when you want the geometry in the block to display on the paper based on the scale of the viewport, but you want the attribute text to display at the Paper Height defined for the attribute.

You can set the orientation of annotative blocks to match the orientation of the paper. For more information about setting the orientation of annotative objects, see Set Orientation for Annotations.

You can use the ANNOTATIVEDWG system variable to specify whether or not the entire drawing will behave as an annotative block when inserted into another drawing. The ANNOTATIVEDWG system variable becomes read-only if the drawing contains annotative objects.