Modify A Dimension |
|
Modify A Dimension |
|
Dimensions can be modified to include more information than just the values of the dimension. Dimensions can also be modified visually by using breaks and by adjusting the spacing between them.
After you place a dimension, there are times when you need to modify the information that the dimension represents. You can add a jog line to a linear dimension to indicate that the dimension value does not represent the actual dimensioned value or add an inspection dimension to represent how often a dimension value of a manufactured part should be checked.
At times you might want to modify a dimension to simply improve readability. You can make sure that the extension or dimension lines do not obscure any objects; you can adjust the placement of linear dimensions so they are evenly spaced.
Jog lines can be added to linear dimensions. Jog lines are used to represent a dimension value that does not display the actual measurement. Typically, the actual measurement value of the dimension is smaller than the displayed value.
Inspection dimensions allow you to effectively communicate how frequently manufactured parts should be checked to ensure that the dimension value and tolerances of the parts are within the specified range.
With dimension breaks, you can keep the dimension, extension, or leader lines from appearing as if they are a part of the design.
You can automatically adjust existing parallel linear and angular dimensions in a drawing so they are equally spaced or aligned at the dimension line with each other.
Expand All
Collapse All
