This describes how to configure the BSC global data when the BM and TC are configured in the same subrack. The BSC global data consists of BSC attributes, SS7 signaling point data, and the relation between the signaling points of the GMPS and GEPS.
Configuring the BSC Attributes
This describes how to configure BSC attributes. In the initial configuration of BSC attributes, you need to configure only the basic attributes. For other attributes, use the default settings. The BSC attributes include the Basic Data, Flow Control Data, BSC Timer, Software Parameters, User Resource Binding, SCCP, NSS and BSSGP, MSC Pool Parameters, Trigger Saving Power Function, IP Transfers, Abis Congestion Control, and Single Pass Exclude MSISDN Number.
Configuring the SS7 Signaling Points
This describes how to configure the SS7 signaling points of the BSC. The OPC and the DPC must be configured. If there is no direct physical link between the OPC and the DPC, you need to configure Signaling Transfer Points (STPs).
Configuring the Subrack-OPC Mapping
This describes how to assign an OPC to the GMPS/GEPS to establish the mapping between the subrack and the OPC.