Add PTPBVC(ADD PTPBVC)

Function

A configuration command that adds a PTP BVC.

Note

1. The specified cell and the NSE ID must exist.

2. When the SGSN Pool function is enabled, a maximum of 32 PTP BVCs can be configured in a cell.

2. When the SGSN Pool function is disabled, only one PTP BVC can be configured in a cell.

3 One NSE ID can correspond to 2048 PTP BVCs.

4. This command can be run only when the built-in PCU is configured in the BSC.

Parameters

ID	Name	Description
NSEI	NSE Identifier	Meaning:NSE Identifier Value range:0~65534 Explanation: This parameter specifies the identifier of a network service entity (NSE). Default value:None
BVCI	PTPBVC Identifier	Meaning:PTPBVC Identifier Value range:2~65534 Explanation: This parameter specifies the BSSGP virtual connection identifier. It is used to identify multiple BVCs that multiplexes the NS-VC. Default value:None
IDXTYPE	Index Type	Meaning:Index Type Value range:BYCELLIDX(By Cell Index),BYCELLNAME(By Cell Name) Explanation:Index Type. Default value:None
CELLIDX	Cell Index	Meaning:Cell Index Value range:0~2047 Explanation: This parameter indicates the source cell index. The source cell index must be unique. Default value:None
CELLNAME	Cell Name	Meaning:Cell Name Value range:1-32 characters Explanation: This parameter indicates the name of the source cell. The name of each cell under one BSC must be unique. Default value:None

Example

1. Add a PTP BVC (NSE Identifier = 1; PTPBVC Identifier = 2; Index Type = BYCELLNAME(By Cell Name); Cell Name = cell):
ADD PTPBVC: NSEI=1, BVCI=2, IDXTYPE=BYCELLNAME, CELLNAME="cell";