| ID | Name | Description |
|---|---|---|
| SRN | Subrack No. | Meaning: This parameter specifies the number of the subrack for running the command. Value range: 0-11 Explanation: The subrack number uniquely identifies a subrack. Default value: None |
| SN | Slot No. | Meaning: This parameter specifies the number of the slot for running the command. Value range: 0-27 Explanation: The subrack number and slot number uniquely identify a board. Default value: None |
| PN | Port No. | Meaning: port number Value range: 0-7 Explanation: 1. For the GFGUA/GFGUB/GFGUG, the value range is 0 to 7. 2. For the GOGUA/GOGUB, the value range is 0 to 1. Default value: None |
Query the information about a port (Subrack No. = 0; Slot No. = 24; Port No. = 0): DSP ETHPORT: SRN=0, SN=24, PN=0; The result is as follows: +++ HUAWEI 2008-06-16 15:57:58 O&M #564 %%DSP ETHPORT: SRN=0, SN=24, PN=0;%% RETCODE = 0 Operation succeeded DSP ETHPORT Result ------------------ Port No. Port Type Port Active/Inactive State Link Status Port Rate Duplex Mode Auto-Negotiation Mode Flow Control Mode Loopback Mode Rx correct bytes Rx bad bytes Number of received Unicast frame Number of received Multicast frame Number of received broadcast frame Number of received frame which length valid ,but CRC check error Number of received VLAN flag frame Number of received PAUSE control frame Tx correct bytes Tx bad bytes Number of sent Unicast frame Number of sent Multicast frame Number of sent broadcast frame Number of sent VLAN flag frame Number of sent frames which have valid length,but CRC check error Number of sent PAUSE control frame 0 FE Active Available 10M HALF ENABLE ENABLE NO LOOP 19759246 0 275807 2 1372 0 0 0 6451740 0 92090 0 85 0 0 0 (Number of results = 1) --- END
| Domain Name | Description |
|---|---|
| Port Type | Type of the Ethernet port. Value range: FE Electrical Port, GE Electrical Port, GE Optical Port |
| Port Active/Inactive State | Activation status of the port. Value range: Active, Inactive |
| Link Status | Availability of the link. Value range: Available, Unavailable |
| Port Rate | Data rate at the port. Value range: 10 Mbit/s, 100 Mbit/s, 1000 Mbit/s, Auto |
| Duplex Mode | Duplex mode of the transmission over the Ethernet port. Value range: FULL, HALF |
| Auto-Negotiation Mode | Specifies whether to enable the auto-negotiation mode. Value range: ENABLE; DISABLE |
| Flow Control Mode | Flow control mode. Value range: ENABLE, DISABLE |
| Loopback mode | Loopback type. Value range: No Loop, Line Loop, Sys Loop |
| Rx correct bytes | Bytes of the valid frames received |
| Rx bad bytes | Bytes of the invalid frames received |
| Number of received Unicast frame | Number of the unicast frames received |
| Number of received Multicast frame | Number of the multicast frames received |
| Number of received broadcast frame | Number of the broadcast frames received |
| Number of received frame which length valid ,but CRC check error | Number of received frames with valid length but errors against the CRC mechanism |
| Number of received VLAN flag frame | Number of received frames with VLAN flags |
| Number of received PAUSE control frame | Number of the PAUSE control frames received |
| Tx correct bytes | Bytes of the valid frames sent |
| Tx bad bytes | Bytes of the invalid frames sent |
| Number of sent Unicast frame | Number of the unicast frames sent |
| Number of sent Multicast frame | Number of the multicast frames sent |
| Number of sent broadcast frame | Number of the broadcast frames sent |
| Number of sent VLAN flag frame | Number of the sent frames with VLAN flags |
| Number of sent frames which have valid length,but CRC check error | Number of sent frames with valid length but errors against the CRC mechanism |
| Number of sent PAUSE control frame | Number of the PAUSE control frames sent |