Each GFGUA/GFGUB/GFGUG/GOGUA/GOGUB has only one IP address, so active and standby boards share the same IP address.
ID | Name | Description |
---|---|---|
SRN | Subrack No. | Meaning: number of the subrack for running the command Value range: 0-11 Explanation: The subrack number uniquely identifies a subrack. Default value: None |
SN | Slot No. | Meaning: number of the slot for running the command Value range: 0-27 Explanation: The subrack number and slot number uniquely identify a board. Default value: None |
SSN | SubSystem No. | Meaning: subsystem number Value range: 0-4 Explanation: Number of the subsystem where the device IP address is located. You can query this parameter through the LST DEVIP MML command. Default value: None |
Query the device IP address of a board (Subrack No. = 0; Slot No. = 24): DSP DEVIP: SRN=0, SN=24; The result is as follows: +++ HUAWEI 2007-12-17 15:51:18 O&M #459 %%DSP DEVIP: SRN=0, SN=24;%% RETCODE = 0 Operation succeeded Query the IP address of the equipment over the A, Abis, and Gb interfaces. --------------------------------------- Subsystem No. IP address subnet mask 0 162.5.5.12 255.255.255.0 (Number of results = 1) --- END