1. You cannot run this command again before the previous result is returned.
2. You cannot specify the device IP address of a standby board as the source IP address.
| ID | Name | Description |
|---|---|---|
| SRN | Subrack No. | Meaning: number of the subrack for running the command Value range: 0-11 Explanation: The subrack number uniquely identifies a subrack. Default value: None |
| SN | Slot No. | Meaning: number of the slot for running the command. Value range: 0-27 Explanation: The subrack number and slot number uniquely identify a board. Default value: None |
| DESTIP | Destination IP address | Explanation: destination IP address Value range: 0.0.0.0-255.255.255.255 Explanation: This parameter specifies the destination IP address. Default value: None |
| SRCIP | Source IP address | Explanation: source IP address Value range: 0.0.0.0-255.255.255.255 Explanation: If you do not set this parameter, it indicates the local IP address. Default value: None |
| TIMES | Ping times | Explanation: number of sent PING packets Value range: 1-60 Explanation: None Default value: 5 |
| PKGSIZE | Package sizes | Meaning: PING packet size Value range: 20-2700 Explanation: 1. Number of the PING packets sent, where the IP header and ICMP header are excluded 2 Unit: byte Default value: 20 |
| TIMEOUT | Time out | Meaning: time expired in response to the PING packets Value range: 1-10000 Explanation: 1. Time expired in response to the PING packets 2 Unit: millisecond Default value: 2000 |
| TTL | TTL | Meaning: TTL (Time to Live) value of a PING packet Value range: 1-255 Explanation: 1. Time to Live (TTL) value of a PING packet Default value: 255 |
| TOS | TOS | Meaning: Type of Service (TOS) value in the PING packet Value range: 0-255 Explanation: 1. Type of Service (TOS) value in the PING packet Default value: 0 |