Modify Edges on 3D Objects

Up a level to ..

Modify Edges on 3D Objects

 

Work with 3D Models > Modify 3D Models > Modify 3D Solid Subobjects > 

Modify Edges on 3D Objects

Expand All Expand all collapsed sections. Collapse All Collapse all expanded sections.

Concept

Procedure

Quick Reference

To chamfer a 3D solid object

1. Click Home tabModify panelChamfer. At the Command prompt, enter chamfer.
2. Select the edge of the base surface to chamfer.

   One of two surfaces adjacent to the selected edge is highlighted.

3. Do one of the following:
   • To select a different surface, enter n (Next).
   • To use the current surface, press Enter.
4. Specify the base surface distance.

   The base surface distance is measured from the selected edge to a point on the base surface. The other surface distance is measured from the selected edge to a point on the adjacent surface.

5. Specify the location of the chamfer using one of the following options.
   • To specify an individual edge, select the edge.
   • To select all edges around the base surface, enter l (Loop). Specify an edge.
6. To complete the chamfer, press Enter.

 Command entry: CHAMFER