Configuring Links on the Ater Interface

This describes how to configure links on the Ater interface. These links are responsible for the signaling transmission between the GMPS/GEPS and the GTCS. If the GTCS is configured on the BSC side, the Ater connection path must be configured. If the GTCS is configured on the MSC side, the Ater connection path, Ater OML, and Ater signaling link must be configured.

  1. Configuring the Ater Connection Path
    This describes how to configure the connection path between the GTCS and the GMPS/GEPS on the Ater interface.
  2. Adding an Ater OML
    This describes how to add an Ater OML. When the GTCS is configured on the MSC side, you need to add an Ater OML between the GMPS and the main GTCS. The Ater OML transmits the OM information for the GTCS.
  3. Adding an Ater Signaling Link
    This describes how to add an Ater signaling link. When the GTCS is configured on the MSC side, the Ater connection path between the GMPS/GEPS and the GTCS must be configured with an Ater signaling link. The Ater signaling link transmits the signaling of service control, TC resource management, and Ater transmission resource management.
Parent topic: Configuring the BSC Links (BM/TC Separated)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.