Configuring the BSC Boards

Configuring the GDPUX
This describes how to add a GDPUX in the GMPS/GEPS and configure its attributes.
Configuring the GFGUA/GOGUA
This describes how to add a GFGUA/GOGUA in the GMPS/GEPS and configure its attributes in A over IP mode. The GFGUA/GOGUA is responsible for the IP transmission on the A interface.
Configuring the GEIUB/GOIUB
This describes how to add a GEIUB or GOIUB in the GMPS or GEPS and configure its attributes. The GEIUB and GOIUB are responsible for the E1/T1 transmission and STM-1 transmission on the Abis interface respectively.
Configuring the GEHUB
This describes how to add a GEHUB in the GMPS/GEPS and configure its attributes. The GEHUB is responsible for the transmission optimization on the Abis interface.
Configuring the GFGUB/GOGUB
This describes how to add a GFGUB/GOGUB in the GMPS/GEPS and configure its attributes. The GFGUB/GOGUB is responsible for the IP transmission on the Abis interface.
Configuring the GGCU
This describes how to configure the attributes of the GGCUs through the LMT. The GGCUs are displayed in slots 12 and 13 of the GMPS by default on the LMT.
Configuring the GSCU
This describes how to configure the attributes of the GSCUs through the LMT. The GSCUs are displayed in slots 6 and 7 of each subrack by default on the LMT.
Configuring the GTNU
This describes how to configure the attributes of the GTNUs through the LMT. The GTNUs are displayed in slots 4 and 5 of each subrack by default on the LMT.
Configuring the GXPUM
This describes how to add GXPUMs in slots 0 and 1 of the GMPS/GEPS and configure their attributes.
Configuring the GXPUT
This describes how to add GXPUTs in slots 2 and 3 of the GMPS/GEPS and configure their attributes.
Configuring the GXPUI
This describes how to add GXPUIs in idle slots of the GMPS/GEPS and configure their attributes.

Parent topic: Configuring the BSC Devices (A over IP)

Previous topic: Configuring a Power Distribution Box

Next topic: Configuring the BSC EAC